Skip Navigation Links.
Zoeken naar publicaties:
Beperk het zoeken tot de velden:

ECN publicatie:
Hetero-Junction Module Technology
Gepubliceerd door: Publicatie datum:
ECN Zonne-energie 5-9-2011
ECN publicatienummer: Publicatie type:
ECN-M--11-011 Conferentiebijdrage
Aantal pagina's: Volledige tekst:
4 Download PDF  (268kB)

Silicon hetero-junction solar cell technology has the potential to combine high efficiencies with thin wafers. Cell efficiencies of 21 % can be achieved on 170 micron thick wafers. A significant reduction of the cost-performance ratio can be realized if these fragile cells are integrated reliably in solar modules. This requires low stress and low-temperature interconnection of individual cells. Also, hetero-junction cells are known to be susceptible to moisture ingress inside the module. Single cell modules have been manufactured using conductive adhesive as interconnection and using a moisture blocking back sheet to protect the cells. The modules have been exposed to climate chamber tests (damp-heat and thermal cycling) according to the IEC 61215 ed. 2 standard. Infrared analysis (IR) and electroluminescence (EL) images were taken to investigate the integrity of cells and their interconnections. Modules made with moisture blocking back-sheets showed that the modules did survive 1500 hours (1.5 times IEC) of damp heat and over 340 thermal cycles with less than 5% reduction in power output. The industrial feasibility of this module technology was demonstrated by manufacturing 72-cell modules, using cells obtained from an industrial party. Assembly of the modules was done using a tabber-stringer capable to work with conductive adhesives, designed for low temperature interconnection.

Terug naar overzicht.