|
Titel:
|
|
Biomass gasification research in fixed bed and fluidised bed reactors
|
|
|
|
Auteur(s):
|
|
|
|
|
|
Gepubliceerd door:
|
Publicatie datum:
|
|
ECN
|
1997
|
|
|
|
ECN publicatienummer:
|
Publicatie type:
|
|
ECN-RX--97-011
|
Artikel wetenschap tijdschrift
|
|
|
|
Aantal pagina's:
|
|
|
13
|
|
Gepubliceerd in: Presented at the international conference "Gasification and pyrolysis of biomass", Stuttgart, Germany, April 1997 (), , , Vol., p.-.
Samenvatting:
A wide variety of biomass types is considered as a fuel for gasification.The exact gasification behaviour for these streams is unknown, which hampers
full-scale implementation. At ECN a package of tools has been developed to
determine gasification characteristics and to evaluate integral gasification
concepts. These tools consist of theoretical models, laboratory equipment and
pilot-scale installations. Attention is focused on supporting the commercial
development of DownDraft Fixed Bed (DDFB) gasification for smaller scale
(1-10 MWth) combined heat and power systems and of Bubbling/Circulating
Fluidised Bed (BFB/CFB) gasification for larger systems (>10 MWth). BFB and
CFB pilot-scale testing is conducted in a 0.7 MWth test facility. The
initial experimental programme is envisaged to consist of test-runs with
short rotation willow, waste wood and roadside grass. It will be conducted in
close cooperation with a main feedstock supplier in the Netherlands. Besides
general operability aspects, fuel gas composition and fuel gas rate,
conversion efficiency, and axial temperature- and pressure profiles will be
determined. DDFB pilot-scale testing is performed in ECN's 0.3 MWth
atmospheric air-blown gasifier. Both pilot-scale installations already have
been operated successfully on wood. The DDFB installation has also been
operated successfully on coal/straw mixtures. With respect to the modelling,
a steady-state reactor model for Bubbling Fluidised Bed (BFB) gasification is
available already, while a steady-state model for CFB gasification is being
developed. In addition, the development of a reactor model for DDFB
gasification is foreseen. The models require a series of empirical input
parameters, which are derived from standardised laboratory-scale tests.
Standardised experimental procedures have been developed to determine these
parameters using, e.g. a lab-scale BFB reactor and a thermogravimetric
analyser. The results of the pilot-scale testing will be used to validate
reactor models. 3 figs., 1 tab., 9 refs.
Terug naar overzicht.