Publicaties

Skip Navigation Links.

Zoeken naar publicaties:
Beperk het zoeken tot de velden:

ECN publicatie:
Titel:
EOSLT Consortium Biomass Co-firing: WP 4: Biomass co-firing in oxy-fuel combustion
 
Auteur(s):
Fryda, L.E.
 
Gepubliceerd door: Publicatie datum:
ECN Biomassa, Kolen en Milieuonderzoek 15-3-2011
 
ECN publicatienummer: Publicatie type:
ECN-E--10-079 ECN rapport
 
Aantal pagina's: Volledige tekst:
58 Download PDF  (867kB)

Samenvatting:
In the frame of WP4 of the EOS LT Co firing program, the ash formation and deposition of selected coal/biomass blends under oxyfuel and air conditions were studied experimentally in the ECN lab scale coal combustor (LCS). The fuels used were Russian coal, South African coal and Greek Lignite, either combusted separately or in blends with cocoa and olive residue. The first trial period included tests with the Russian and South African coals and their blends with cocoa, the second trial period included Lignite with olive residue tests and a final period firing only Lignite and Russian coal, mainly to check and verify the observed results. During the testing, also enriched air combustion was applied, in order to establish conclusions whether a systematic trend on ash formation and deposition exists, ranging from conventional air, to enriched air (improving post combustion applications) until oxyfuel conditions. A horizontal deposition probe equipped with thermocouples and heat transfer sensors for on line data acquisition, and a cascade impactor (staged filter) to obtain size distributed ash samples including the submicron range at the reactor exit were used. The deposition ratio and the deposition propensity measured for the various experimental conditions were higher in all oxyfuel cases. No significant variations in the ash formation mechanisms and the ash composition were established. Finally the data obtained from the tests performed under air and oxy-fuel conditions were utilised for chemical equilibrium calculations in order to facilitate the interpretation of the measured data; the results indicate that temperature dependence and fuels/blends ash composition are the major factors affecting gaseous compound and ash composition rather than the combustion environment, which seems to affect neither the ash and fine ash (submicron) formation, nor the ash composition. The ash deposition mechanisms were studied in more detail in Part II of this report.


Terug naar overzicht.