|
Titel:
|
|
Irradiation testing of stainless steel plate material and weldments: report on ITER task T14, part C: fracture toughness up to 5 dpa at 350 and 525 K
|
|
|
|
Auteur(s):
|
|
|
|
|
|
Gepubliceerd door:
|
Publicatie datum:
|
|
ECN
NUCLEAIR
|
1997
|
|
|
|
ECN publicatienummer:
|
Publicatie type:
|
|
ECN-C--97-089
|
ECN rapport
|
|
|
|
Aantal pagina's:
|
Volledige tekst:
|
|
54
|
Niet beschikbaar.
|
Samenvatting:
The fracture toughness properties of unirradiated and neutron irradiatedSPH stainless steel plate, EB weldments, and full 16-8 TIG-deposits have been
measured. Compact tension specimens with a thickness of 10 and 12 mm of the
European Reference Heat 1 and 2 (ERH1 and ERH2) were irradiated in the High
Flux Reactor (HFR) in Petten, The Netherlands, simulating the first wall
conditions by a combination of high displacement damage with proportional
amounts of helium. Helium contents are in the range of 10 to 60 appm
depending on dose level. The irradiation conditions were 0.5 and 5
displacements per atom (dpa) at 350K and 0.5, 2.7, 3.6, 5, and 6 dpa at 525K.
Testing temperatures were 353, 523, and 723K. The report contains the
experimental conditions and summarises the results, which are given in terms
of J-resistance curve fits, J0.2BL and J1mm. This report closes the
final deliverable ECN-6 of ITER Task T14. The main conclusions include that
the 0.5 dpa, 350K irradiation gives a considerable reduction in J-toughness
in plate materials and TIG deposit. The TIG deposit in general, however,
shows less irradiation induced reduction of fracture toughness than the ERH
materials. The increase of the dose up to 5 dpa does not give a further
significant decrease in fracture toughness for the above materials, which
implies saturation at 350K. The EB-welded ERH2 does not show degradation
saturation for 350K, 0.5 dpa for testing temperatures other than 723K. The
525K irradiations for all materials induce a gradual decrease in fracture
toughness up to the maximum of 5 to 6 dpa. EB and plate are comparable in
fracture toughness with respect to the actual J-energy levels necessary for
crack extension, where TIG deposit needs less J-energy for crack growth. 35
figs., 40 tabs., 22 refs.
Terug naar overzicht.