|
Titel:
|
|
Measurement results of a hybrid adsorption-compression heat pump based on a roots compressor and silica gel-water sorption cycle
|
|
|
|
Auteur(s):
|
|
|
|
|
|
Gepubliceerd door:
|
Publicatie datum:
|
|
ECN
Efficiency & Infrastructure
|
11-3-2011
|
|
|
|
ECN publicatienummer:
|
Publicatie type:
|
|
ECN-M--11-029
|
Conferentiebijdrage
|
|
|
|
Aantal pagina's:
|
Volledige tekst:
|
|
9
|
Download PDF
(326kB)
|
Samenvatting:
Thermally driven sorption systems can provide significant energy savings, especially in industrial applications. The driving temperature for operation of such systems limits the operating window and can be a barrier for market-introduction. By adding a work-driven compressor, the heat-driven cycle can be made with waste heat at lower temperatures. In this paper such heat pumps, using both the work potential from waste heat and work from a compressor, will be referred to as hybrid heat pumps.
ECN has a long history on sorption heat pump research, including both silica gel-water as well as ammonia-salt sorption systems, and has recently started the development of a hybrid heat pump. The final goal is to develop a hybrid heat pump for upgrading lower (<100°C) temperature industrial waste heat to above pinch temperatures. This heat pump will likely be based on the adsorption and desorption of ammonia on ammonia-salts and combine the continuous process of the compressor with the batch operated sorption reactors. The compressor for these heat pumps will typically run at a low pressure ratio (<3), to achieve high energy efficiency, and at relatively high volume-flows (>1000 m3/hr).
The first tests on a hybrid heat pump are, however, conducted on a silica gel-water system that has been thoroughly tested earlier, in combination with a roots compressor. This paper will present the results of measurements on this hybrid heat pump system.
Terug naar overzicht.